Tired of bar wobble and bent bars?

Inward Scooters' bars are custom hand made in the USA from 4130 chromoly steel tubing with a 0.065 inch wall thickness.  There is  an extra 4-inch long steel reinforcement tube with a 0.035 inch thick wall inside the crossbar where it is welded to the steering tube. The stock Razor double clamp fits perfectly with these bars as well as all standard bar ends. No shims necessary!

You can customize your bars with height, width and color.  Those that use the Brass Knuckle SCS compression can order the bars without the slit / notch.

Height

When specifying height, please measure from the bottom of the steering tube (where the clamp is) up to the center of the handlebars. If you order the bars to be used with the SCS compression system, order them 2 inch shorter than you normally would and choose the "no slit" option.

Width

Specify the width of your handlebars. A good rule of thumb is to use your shoulder width.

Color

The Inward Scooters' bars come standard RAW (no coating). You can customize the bars in 7 different colors of powdercoating: Flat Black, Red, sky blue, Orange, Silver, Purple, neon green, and White.

Slit

If you use the Brass Knuckle SCS compression, order your bars 2 inch shorter than regular and order the "no slit" option.