Use the overview below to choose the fork that fits you best.

Please be aware that threadless forks require a threadless headset and a compression set! (read more about threadless or threaded further down this page).

Aluminum forks:

Hybrid and steel forks:

Tired of bent and broken forks?

Inward forks are custom made in the USA and extremely strong. They come standard for wheel sizes of up to 110mm, and an extra strong threadless steerer tube with a wall thickness of .083 inch.  You have the ability to completely customize this fork to your specifications as follows:

Offset

We enable you to order a fork with “zero offset”. This means your wheel is directly under the steering tube. The advantage is a more balanced bar spin, and your fork is always pointing in the right direction after the bar spin. The Extreme fork has an offset of 10mm (about 3/8 inch). This means your front wheel is mounted 10mm in front of the center of your steering tube, just like the stock Razor fork.

Wheel size

Inward Forks come standard for a 100 or 110mm Wheel.

Threaded or Threadless

The Inward fork comes standard as threadless. The threadless fork comes prepared for a compression system and has a recessed cup in the bottom with a hole for a compression bolt. 

Steerer tube wall thickness:

The threadless Inward fork comes standard with a 0.083 inch thick wall, which is plenty strong for most riders. Threaded forks come with 0.120 inch wall. (see bottom picture on right) . 

SCS or HIC  star nut install:

We can save you the trouble of installing a star nut for your SCS or HIC compression set and will do it for you using a professional tool. Note: You still will have to buy the SCS or HIC separately!

Color:

You can pick from these 7 colors: Black, Red, Sky Blue, Neon Green,  Orange, Purple, and White.